Today got off to a slow start, sewing-wise. I finally got back to the black jacquard shirt and got it cut out quite without incident. I used the pinking blade on my rotary cutter which I may turn out to regret. I started with the interfacings which put me in a muddle requiring a computer break.
The Pain of Polyester
This is a lovely fabric which I bought at Fabricville in the summer for $2.99 a meter -- so a great bargain for a test garment. I can't say that I really like jacquard -- looks like old-lady fabric to me, even though some might say I AM an old lady. I bought it shortly after I started sewing and was experimenting with various things. Also looking for bargains to experiment with.
So as I work with this, I realize what I have always known, even when I did not sew: I really don't like polyester! I find it uncomfortable to wear in hot weather and cold. For spring and fall it isn't too bad. I have a few things that are fairly comfortable most of the time; but my goodness, there must be a better way.
I try not to buy polyester fabrics, but it's like not buying pre-packaged food at the grocery store. It doesn't leave much to choose from. I have some poly in my SWAP -- the shirt stuff I bought yesterday, a green faux suede, the panne velour and a poly-viscose black which has yet to prove itself comfortable or otherwise. The rest are cottons, linens, and a wool crepe....so far.
Anyway, I will tough this one out, and the shirt ultimately will look fine. It's only a muslin anyway---and if I can make it of poly, then surely I can easily make it from whatever else is here.
Interfacing Woes
Toughing it out. Yes. Interfacing is not one of my favorite things to do. I recently gave up on fusible interfacing because it shrinks up, sometimes under the iron, and it seems like a great bother to pre-shrink, steam or whatever the rules are about interfacing pre-treatment. I think I have a mental block. Anyway, for this shirt, I decided to use a piece of fusible from my stash, cut out the facing bits and didn't have enough for the collar. Ah-ha, I said to myself. Use some of that knit fusible you have upstairs. It should be better for the collar anyway. (Why I thought it would be better is anybody's guess because interfacing is one of the gaping holes in my knowledge base.)
Carefully I cut the collar shape, then read the directions that said to trim the seam allowances to 1.8" Not to worry. Still on the ironing board which I was using for my cutting surface I trimmed the edges of the slippery slidey knit, which I discovered leaves all sorts of bits of fuzz on the black jacquard and on the ironing board cover. Without thinking much more about the fuzz, I carefully followed the rest of the application directions, using a damp cloth and appropriate pressure. I even remembered reading somewhere not to move the piece until it was cool.
While waiting, I thought I would use my iron to steam the pellon fusible pieces to be sure they would not shink later. No problem except that this is what I hate about preparing interfacing. I interfaced the back neck facing, and was about the steam the second long front facing. I picked it up and noticed the edge had gone all shrunken and squishy. Remember, I am working on my ironing board. I had taken the hot pressing cloth and placed in in the vicinity of the pellon facings. I tugged a little and managed to rip the stuff. Good grief.
Back to the drawing board. I think I'll put some sewn-in stuff in the facings, or maybe even just an extra layer of Fashion Fabric. I guess I just have to go off and study this topic, but whatever I read seems so daunting that I put it off till another day.
Meanwhile, I decided to brush the fuzz off the collar piece. Indeed! The fuzz of course, was from fusible knit -- and had nicely fused wherever the heat hit. Ah yes. Thinking IS an important part of this journey.
Still no answer from the forum on my seam-edge interfacing, but I did find out on another message board that "Fuse and Fold" is a bias fusible that has a chain stitch down the middle for stability. The writer suggested using twill tape instead, but I'm not sure that would work in this application. Maybe I can find a source of fusible bias somewhere and give it a try.
Time for supper and another tai chi class, so likely not much more progress today.
End of Day Progress
After 10:00pm is not the best time for sewing, as evidenced by the seams being picked out, but I did start the shirt, and got the interfacing finished, the edge of the front and neck facings bound, and the collar sewn together and topstitched. Only 2 short seams had to be completely removed and redone.
It's an easy pattern, and tomorrow should see most of the shirt finished -- with luck and a little time, then I will get back to the velour tank top and see what can be done there.
Showing posts with label interfacing. Show all posts
Showing posts with label interfacing. Show all posts
Wednesday, November 15, 2006
Subscribe to:
Posts (Atom)